Xiaomi Binary Sensor
The xiaomi aqara binary sensor platform allows you to get data from your Xiaomi binary sensors.
The requirement is that you have setup the xiaomi aqara component.
Type of sensors supported
| Name | ZigBee entity | Model no. | States | Event | Event key | Event values |
|---|---|---|---|---|---|---|
| Motion Sensor (1st gen) | motion | RTCGQ01LM | on, off | motion |
||
| Motion Sensor (2nd gen) | sensor_motion.aq2 | RTCGQ11LM | on, off | motion |
||
| Door and Window Sensor (1st gen) | magnet | WSDCGQ01LM | on, off | |||
| Door and Window Sensor (2nd gen) | sensor_magnet.aq2 | MCCGQ11LM | on, off | |||
| Smoke Detector | smoke | JTYJ-GD-01LM/BW | on, off | |||
| Gas Leak Detector | natgas | JTQJ-BF-01LM/BW | on, off | |||
| Water Leak Sensor | sensor_wleak.aq1 | SJCGQ11LM | on, off | |||
| Button (1st gen) | switch | WXKG01LM | on (through long_click_press), off | click |
click_type |
long_click_press, long_click_release, hold, single, double |
| Button (2nd gen) | sensor_switch.aq2 | WXKG11LM | off (always) | click |
click_type |
single, double |
| Aqara Wireless Switch (Single) | 86sw1 | WXKG03LM | off (always) | click |
click_type |
single |
| Aqara Wireless Switch (Double) | 86sw2 | WXKG02LM | off (always) | click |
click_type |
single, both |
| Cube | cube | MFKZQ01LM | off (always) | cube_action |
action_type, action_value (rotate) |
flip90, flip180, move, tap_twice, shake_air, swing, alert, free_fall, rotate (degrees at action_value) |
Automation examples
Motion
- alias: If there is motion and its dark turn on the gateway light
trigger:
platform: state
entity_id: binary_sensor.motion_sensor_158d000xxxxxc2
from: 'off'
to: 'on'
condition:
condition: numeric_state
entity_id: sensor.illumination_34ce00xxxx11
below: 300
action:
- service: light.turn_on
entity_id: light.gateway_light_34ce00xxxx11
data:
brightness: 5
- service: automation.turn_on
data:
entity_id: automation.MOTION_OFF
- alias: If there no motion for 5 minutes turn off the gateway light
trigger:
platform: state
entity_id: binary_sensor.motion_sensor_158d000xxxxxc2
from: 'on'
to: 'off'
for:
minutes: 5
action:
- service: light.turn_off
entity_id: light.gateway_light_34ce00xxxx11
- service: automation.turn_off
data:
entity_id: automation.Motion_off
Door and/or Window
- alias: If the window is open turn off the radiator
trigger:
platform: state
entity_id: binary_sensor.door_window_sensor_158d000xxxxxc2
from: 'off'
to: 'on'
action:
service: climate.set_operation_mode
entity_id: climate.livingroom
data:
operation_mode: 'Off'
- alias: If the window is closed for 5 minutes turn on the radiator again
trigger:
platform: state
entity_id: binary_sensor.door_window_sensor_158d000xxxxxc2
from: 'on'
to: 'off'
for:
minutes: 5
action:
service: climate.set_operation_mode
entity_id: climate.livingroom
data:
operation_mode: 'Smart schedule'
Smoke
- alias: Send notification on fire alarm
trigger:
platform: state
entity_id: binary_sensor.smoke_sensor_158d0001574899
from: 'off'
to: 'on'
action:
- service: notify.html5
data:
title: Fire alarm!
message: Fire/Smoke detected!
- service: xiaomi_aqara.play_ringtone
data:
gw_mac: xxxxxxxxxxxx
ringtone_id: 2
ringtone_vol: 100
Gas
- alias: Send notification on gas alarm
trigger:
platform: state
entity_id: binary_sensor.natgas_sensor_158dxxxxxxxxxx
from: 'off'
to: 'on'
action:
- service: notify.html5
data_template:
title: Gas alarm!
message: 'Gas with a density of {{ states.binary_sensor.natgas_sensor_158dxxxxxxxxxx.attributes.density }} detected.'
Xiaomi Wireless Button
Available events are single, double, hold, long_click_press and long_click_release. For Square version (Aqara brand) only single and double events are supported. Furthermore the space between two clicks to generate a double click must be quite large now.
- alias: Toggle dining light on single press
trigger:
platform: event
event_type: click
event_data:
entity_id: binary_sensor.switch_158d000xxxxxc2
click_type: single
action:
service: switch.toggle
entity_id: switch.wall_switch_left_158d000xxxxx01
- alias: Toggle couch light on double click
trigger:
platform: event
event_type: click
event_data:
entity_id: binary_sensor.switch_158d000xxxxxc2
click_type: double
action:
service: switch.toggle
entity_id: switch.wall_switch_right_158d000xxxxx01
- alias: Let a dog bark on long press
trigger:
platform: event
event_type: click
event_data:
entity_id: binary_sensor.switch_158d000xxxxxc2
click_type: long_click_press
action:
service: xiaomi_aqara.play_ringtone
data:
gw_mac: xxxxxxxxxxxx
ringtone_id: 8
ringtone_vol: 8
Xiaomi Cube
Available events are flip90, flip180, move, tap_twice, shake_air, swing, alert, free_fall and rotate. The component stores the last action as the attribute last_action.
- alias: Cube event flip90
trigger:
platform: event
event_type: cube_action
event_data:
entity_id: binary_sensor.cube_15xxxxxxxxxxxx
action_type: flip90
action:
- service: light.turn_on
entity_id: light.gateway_light_28xxxxxxxxxx
data:
color_name: "springgreen"
- alias: Cube event flip180
trigger:
platform: event
event_type: cube_action
event_data:
entity_id: binary_sensor.cube_15xxxxxxxxxxxx
action_type: flip180
action:
- service: light.turn_on
entity_id: light.gateway_light_28xxxxxxxxxx
data:
color_name: "darkviolet"
- alias: Cube event move
trigger:
platform: event
event_type: cube_action
event_data:
entity_id: binary_sensor.cube_15xxxxxxxxxxxx
action_type: move
action:
- service: light.turn_on
entity_id: light.gateway_light_28xxxxxxxxxx
data:
color_name: "gold"
- alias: Cube event tap_twice
trigger:
platform: event
event_type: cube_action
event_data:
entity_id: binary_sensor.cube_15xxxxxxxxxxxx
action_type: tap_twice
action:
- service: light.turn_on
entity_id: light.gateway_light_28xxxxxxxxxx
data:
color_name: "deepskyblue"
- alias: Cube event shake_air
trigger:
platform: event
event_type: cube_action
event_data:
entity_id: binary_sensor.cube_15xxxxxxxxxxxx
action_type: shake_air
action:
- service: light.turn_on
entity_id: light.gateway_light_28xxxxxxxxxx
data:
color_name: "blue"
Aqara Wireless Switch
The Aqara Wireless Switch is available as single-key and double-key version. Each key behaves like the Wireless Button limited to the click event single. The double key version adds a third device called binary_sensor.wall_switch_both_158xxxxxxxxx12 which reports a click event called both if both keys are pressed.
- alias: Decrease brightness of the gateway light
trigger:
platform: event
event_type: click
event_data:
entity_id: binary_sensor.wall_switch_left_158xxxxxxxxx12
click_type: single
action:
service: light.turn_on
entity_id: light.gateway_light_34xxxxxxxx13
data_template:
brightness: >-
{% if states.light.gateway_light_34xxxxxxxx13.attributes.brightness %}
{% if states.light.gateway_light_34xxxxxxxx13.attributes.brightness - 60 >= 10 %}
{{states.light.gateway_light_34xxxxxxxx13.attributes.brightness - 60}}
{% else %}
{{states.light.gateway_light_34xxxxxxxx13.attributes.brightness}}
{% endif %}
{% else %}
10
{% endif %}
- alias: Increase brightness of the gateway light
trigger:
platform: event
event_type: click
event_data:
entity_id: binary_sensor.wall_switch_right_158xxxxxxxxx12
click_type: single
action:
service: light.turn_on
entity_id: light.gateway_light_34xxxxxxxx13
data_template:
brightness: >-
{% if states.light.gateway_light_34xxxxxxxx13.attributes.brightness %}
{% if states.light.gateway_light_34xxxxxxxx13.attributes.brightness + 60 <= 255 %}
{{states.light.gateway_light_34xxxxxxxx13.attributes.brightness + 60}}
{% else %}
{{states.light.gateway_light_34xxxxxxxx13.attributes.brightness}}
{% endif %}
{% else %}
10
{% endif %}
- alias: Turn off the gateway light
trigger:
platform: event
event_type: click
event_data:
entity_id: binary_sensor.wall_switch_both_158xxxxxxxxx12
click_type: both
action:
service: light.turn_off
entity_id: light.gateway_light_34xxxxxxxx13