Lights
This component allows you to track and control various light bulbs. Read the platform documentation for your particular light hardware to learn how to enable it.
The light component supports multiple entries in configuration.yaml
by appending a sequential number to the section: light 2:
, light 3:
etc.
Service light.turn_on
Turns one light on or multiple lights on using groups.
Most lights do not support all attributes. You can check the platform documentation of your particular light for hints but in general you will have to try things out and see what works.
Service data attribute | Optional | Description |
---|---|---|
entity_id |
no | String or list of strings that point at entity_id s of lights. Else targets all. |
transition |
yes | Number that represents the time (in seconds) the light should take to transition to the new state. |
profile |
yes | String with the name of one of the built-in profiles (relax, energize, concentrate, reading) or one of the custom profiles defined in light_profiles.csv in the current working directory. Light profiles define a xy color and a brightness. If a profile is given and a brightness then the profile brightness will be overwritten. |
xy_color |
yes | A list containing two floats representing the xy color you want the light to be. Two comma separated floats that represent the color in XY. |
rgb_color |
yes | A list containing three integers representing the rgb color you want the light to be. Three comma separated integers that represent the color in RGB. You can find a great chart here: Hue Color Chart |
white_value |
yes | Integer between 0 and 255 for how bright a dedicated white LED should be. |
color_temp |
yes | An integer in mireds representing the color temperature you want the light to be. |
kelvin |
yes | Alternatively, you can specify the color temperature in Kelvin. |
color_name |
yes | A human readable string of a color name, such as blue or goldenrod . All CSS3 color names are supported. |
brightness |
yes | Integer between 0 and 255 for how bright the color should be. |
brightness_pct |
yes | Alternatively, you can specify brightness in percent (a number between 0 and 100). |
flash |
yes | Tell light to flash, can be either value short or long . |
effect |
yes | Applies an effect such as colorloop or random . |
In order to apply attributes to an entity you will need to add data:
to the configuration. See example below
# Example configuration.yaml entry
automation:
- id: one
alias: Turn on light when motion is detected
trigger:
- platform: state
entity_id: binary_sensor.motion_1
to: 'on'
action:
- service: light.turn_on
data:
entity_id: light.living_room
brightness: 255
kelvin: 2700
Service light.turn_off
Turns one or multiple lights off.
Service data attribute | Optional | Description |
---|---|---|
entity_id |
yes | String or list of strings that point at entity_id s of lights. Else targets all. |
transition |
yes | Integer that represents the time the light should take to transition to the new state in seconds. |
Service light.toggle
Toggles the state of one or multiple lights using groups.
Note: If light.toggle
is used for a group of lights, it will toggle the individual state of each light.
Service data attribute | Optional | Description |
---|---|---|
entity_id |
no | String or list of strings that point at entity_id s of lights. Else targets all. |
transition |
yes | Integer that represents the time the light should take to transition to the new state in seconds. |