DTE Energy Bridge


A sensor platform for the DTE Energy Bridge. To find out which version of the DTE Energy Bridge sensor you have, find the status LED on your box.

  • If the status LED is on the top, you have a v1.
  • If the status LED is on the front, you have a v2.

To enable this sensor, add the following lines to your configuration.yaml file:

# Example configuration.yaml entry
sensor:
  - platform: dte_energy_bridge
    ip: 192.168.1.11

Configuration variables:

  • ip (Required): The IP address of your bridge.
  • name (Optional): Name to use in the frontend.
  • version (Optional): Hardware version of the sensor. Defaults to 1.