Skybeacon sensor


The skybeacon sensor platform supports CR2477-powered iBeacon/eddystone sensors that come with temperature/sensor module.

To use your Skybeacon sensor in your installation, add the following to your configuration.yaml file:

# Example configuration.yaml entry
sensor:
  - platform: skybeacon
    mac: "xx:xx:xx:xx:xx:xx"
    monitored_conditions:
      - temperature
      - humidity
  • mac (Required): The MAC address of your sensor. You can find this be running hcitool lescan from command line.
  • monitored_conditions array (Required): The parameters that should be monitored.
    • temperature: Temperature at the sensor’s location.
    • humidity: Humidity at the sensor’s location.