TEMPer Sensor

This temper sensor platform allows you to get the current temperature from a TEMPer device.

To use your TEMPer sensor in your installation, add the following to your configuration.yaml file:

# Example configuration.yaml entry
sensor:
  - platform: temper

Configuration Variables

offset

(int)(Optional)The offset to fix reported vales.

Default value: o

scale

(int)(Optional)The scale for the sensor.

Default value: 1

name

(string)(Optional)The name to use when displaying this switch.

Default value: myStrom Switch

Since some of these sensors consistently show higher temperatures the scale and offset values can be used to fine-tune your sensor. The calculation follows the formula scale * sensor value + offset.

The TEMPer sensors can only be accessed as root by default. To fix the USB permissions on your system create the file /etc/udev/rules.d/99-tempsensor.rules and add the following line to it:

SUBSYSTEMS=="usb", ACTION=="add", ATTRS{idVendor}=="0c45", ATTRS{idProduct}=="7401", MODE="666"

After that re-plug the device and restart Home Assistant.