Z-Wave

To enable Z-Wave, plug your Z-Wave USB stick into your Raspberry Pi 3 and add the following to your configuration.yaml:

zwave:
  usb_path: /dev/ttyACM0

RAZBERRY BOARD

If you need GPIO on Raspberry Pi 3 for your Z-Wave module, add the following line into config.txt (you have to access that on the SD card directly; simply plug it into your PC and edit it there):

dtoverlay=pi3-miniuart-bt

After that, you need to change usb_path to /dev/ttyAMA0 in your configuration.yaml.

zwave:
  usb_path: /dev/ttyAMA0

HUSBZB-1

zwave:
  usb_path: /dev/ttyUSB0

zha:
  usb_path: /dev/ttyUSB1
  database_path: /config/zigbee.db

Further reading

For more information on using Z-Wave, see the main documentation.